PROF. DR. MUSTAFA ÜRGEN                                                                          

Uluslararası Makaleler

Karakuş, A. Yaman, M.Ürgen, Zur Korrosion von Zink in schwefelsauere waessrigen Lösüngen Bull. Tech. Univ. Istanbul, 37, 1, 65, 1984

M. Ürgen, U. Stolz, R Kirchheim, ESCA Measurements of Films on Molybdenum Formed in the Passive and Transpassive Region, Corrosion Science, 30, 4/5, s:377-391, 1990

M. Ürgen, A.F. Çakır, The Effect of Molybdate Ions on The Temperature Dependent Pitting Potential of Austenitic Stainless Steels in Neutral Chloride Solutions, Corrosion Science, 32, 8, s: 841-852, 1991

M. Ürgen, A Modified Version of Nielsen's Decoration Technique (short communication), Corrosion Science, 33/7, 1179, 1992.

M. Ürgen, A.F. Çakır, O.L. Eryılmaz, C.Mitterer, Corrosion of Zirconium Boride and Zirconium Boron Nitride Coated Steels, Surface & Coatings Technology, 71, 60-66, 1995.

M. Ürgen, A.F. Çakır, O.L. Eryılmaz, C.Mitterer, Defect Evaluation by Copper Decoration Technique, Practical Metallography, 3, 126-135, 1995.

O.V. Akgün, M. Ürgen, A.F. Çakır, The Effect of Heat Treatment on Corrosion Behaviour of Laser Surface Melted 304L Stainless Steel, Materials Science and Engineering, A203, 324-331, 1995.

N. Cansever, A.F. Çakır, M. Ürgen, Fractographic Observations on Chloride Stress Corrosion Cracking of AISI 304 Stainless Steel Under Salt Crust, Practical Metallography, 8, 421-431, 1996

N. Cansever, A.F. Çakır, M. Ürgen, New Accelerated Test for Studying the Susceptibility of Stainless Steels to Chloride SCC under Salt Crust, Corrosion Science, 38, 11, pp. 2043-2048,1996

M, Ürgen, A.F. Çakır, Effect of Heating on Corrosion Behaviour of TiN and CrN Coated Steels, Surface & Coatings Technology, 96 (1997) 236-244

M. Ürgen, O.L. Eryılmaz, A.F. Çakır, E.S. Kayalı, B. Nilufer, Y.Işık, Characterisation of molybdenum nitride coatings produced by arc-PVD technique, Surface & Coatings Technology, 94-95 (1997) 501-506

O.L.Eryılmaz, M. Ürgen, A.F. Çakır, M.K. Kazmanlı, U.H. Kahraman, The effect of sputter cleaning of steel substrates with neutral molecule source on the adhesion of TiN films, Surface & Coatings Technology, 97 (1997) 488-491

F. Sertçelik, A.F. Çakır, M. Ürgen, D.H. Ross and D.R. Gabe, The Effect of Molybdate Ions on A.C. Sulphuric Acid Anodized 6063 Aluminium Alloys, Trans. IMF, 1998, 76 (5), 179

M.K. Kazmanlı, B. Rother, M. Ürgen, C. Mitterer, Identification of cracks generated by indentation experiments in hardcoating systems, Surface & Coatings Technology, 107,(1998) 65-75

Ö. Keleş, Y. Taptık, O.L. Eryilmaz, M. Ürgen, A.F. Çakır, Optimization of arc-PVD TiN coating process parameters by Taguchi technique, Quality Engineering,12 (1), 29-36 1999-2000

Y. Şen, M.Ürgen, K. Kazmanlı, A.F. Çakır, Stripping of CrN from CrN coated HSS steels, Surface & Coatings Technology, 113/1-2 (1999) 31-35

N. Cansever, A.F. Çakır, M. Ürgen, Inhibition of stress corrosion cracking of AISI 304 stainless steels by molybdate ions at elevated temperatures under salt crust, Corrosion Science 41, 7, (1999) 1289-1303

A.Erdem-Şentalar, M. Tatlıer, M. Ürgen, Preparation of zeolite coatings by direct heating of substrates, Microporous And Mesoporous Materials,32: (3) 331-343 Dec 1 1999

A.F. Çakır, A. Metel, M. Ürgen, S. Grigoriev, Arc_PVD coating of metallic and dielectric substrates using neutral melecular beam source pre-treatment, Galvanotechnik, 91 (1), (2000) 1-8,

H. Ahlatçı, M.C. Türküz, H. Çimenoğlu, M. Ürgen and E.S. Kayalı, Characterization and Machining Performance of TiN Coated M35 Quality Cutting Tools (accepted for publication  Metall, 2001

K. Genel, M.Demirkol, M. Ürgen, Effect of cathodic polarization on corrosion fatique behavior of ion nitrided AISI 4140 Steel, (Intl. Journal of Fatique yayına gönderildi)

Uluslararası Bildiriler

M. Ürgen, F. Sertçelik, A.F. Çakır The Effect of Sulfate and Molybdate Ions on the Temperature Dependent Pit Morphology of AISI 304 Stainless Steels in Neutral Chloride Solutions, Proceedings of Eurocorr91, Budapest, 21-25 October, Hungary (1991)

M.Ürgen, O.L. Eryılmaz, A.F. Çakır and K. Tokmanoğlu, Ark-PVD yöntemi ile TiN kaplanmış çeliklere dekorasyon tekniğinin uygulanarak hataların belirlenmesi, International Ceramic Congress Proceedings, 530-535, 19-23 October, Istanbul (1992)

A. Umay, M. Ürgen, A.F. Çakır, Zn ve In’un Al-Zn-In harcanabilir anotların özelliklerine etkisi. VII. International Metallurgy and Materials Congress Proceedings, 4-8 May, Ankara, V:II, 1357-68, (1993)

M.Ürgen, A. Umay, A.F. Çakır, The Relation Between Pitting - Hysteresis Behaviour and Intergranular Corrosion in Al-Cu Alloys), Progress in the Understanding of Corrosion, V.II, Ed. J.M. Costa and A.D. Mercer, The Institute of Materials, 1389-95 (1993), Proceedings of the 10th European Corrosion Congress, 5-8 July, Barcelona, Spain (1993)

M.Ürgen, A.F. Çakır and O.L. Eryılmaz, The Use of the Decoration Technique to Evaluate Defects in ARC PVD TiN and CrN Coated Steel, 34 th Corrosion Science Symposium, University of Sheffield, Sheffield, 22-24 September, 1993 

M.Ürgen, A.F. Çakır and O.L. Eryılmaz, The Use of the Decoration Technique to Evaluate Defects in ARC PVD TiN and CrN Coaated Steel 4th EAST Conference "New Materials and Technologies in Surface Finishing for Better Corrosion and Tribology Properties" , 18-19 November, 1993, Schwaebisch Gmünd, Germany

M. Ürgen, A.F. Çakır, O.L. Eryılmaz, Corrosion Behaviour of CrN Coated Steels, Proceedings of the II.International Ceramic Congress Cilt 2.,pp  373- 379, 24-28 October 1994, İstanbul, Turkish Ceramic Society, No 11, 1994

M. Ürgen, A.F. Çakır, O.L. Eryılmaz, C.Mitterer, Defect Evaluation by in PVD Coated Steels by Copper Decoration Technique, Berichte der 9. Internationalen Metallographie Tagung, 28-30 Sept. 1994 Leoben Österreich, Fortschritte in der Metallographie, p. 443-451, Carl Hanser Verlag, München, Wien, 1995

Y. Taptık, M. Ürgen, Ö. Keleş, M. Doğansoysal, Ürün Tasarımında Kalite Olgusu ve Malzeme Seçimi ve Ölçme - Kontrol Yöntemlerinin Ürün Kalitesine Etkisi, 8. Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, shf. 1391-1403,  6-9 Haziran 1995, İstanbul, Poster.

E. Keleşoğlu, C. Mitterer, P. Loblischler, M. Ürgen, Defect Evaluation in PVD Hard Coatings, VDI Seminar, Prüfverfahren für dünne Schichten, Poster Presentation, Düsseldorf 12 December 1995

Y. Taptık, M. Ürgen, A.F. Çakır, Optimisation of the Production of Hard Ceramic Coated Cutting Tools by Taguchi Technique, Proceedings 4. International Quality Congress, Vol: 2 pp. 388-409,  8-9 November 1995, İsanbul

M. Ürgen, A.F. Çakır, O.L. Eryılmaz, C. Mitterer, Corrosion Behavior of Zirconium Boron Nitride and Zirconium Boride Multilayer Coated Steels, Proceedings of Interfinish 96, Vol. I, pp 351-358, 1996 Birmingham

A.F. Çakır, M. Ürgen, E. S. Kayalı, University-Industry Cooperation in High Technology Hard Ceramic Coatings: Production-Application and Development, International Conference on Technology Management University/Industry/Government Collaboration- UNIG'96, June 24-26 1996, Istanbul,

M.K. Kazmanlı, K. Tokmanoğlu, M. Ürgen, A.F. Çakır, Properties of Multi-Layer TiN-TiAlN Coatings Produced by Arc PVD Technique, Proceedings of the III.International Ceramic Congress vol. 2.,pp 372-378, 22-25 October 1996, İstanbul, Turkish Ceramic Society No 17,

Ö. Keleş, Y.Taptık, O.L. Eryılmaz, M. Ürgen, A.F. Çakır, Optimization of the Arc-PVD TiN Coating Process Parameters by the Taguchi Technique, International Conference on Metallurgical Coatings and Thin Films, ICMTF 97, San Diego, 21-25 April 1997

M. Ürgen, Modern Surface Processing and Developments in Turkey, Proceedings of the 9^th International Metallurgy and Materials Congress, Vol. I pp. 333-351, 11-15 June 1997, İstanbul  (Invited Lecture)

F. Sertçelik, A. F. Çakır, M. Ürgen, D. Gabe and D. Ross, Effect of Pretreatment prior to Anodizing on the Surface Properties of 6063 Al Alloy, Proceedings of the 9^th International Metallurgy and Materials Congress, Vol. I, pp. 159-164, 11-15 June 1997, İstanbul 

Y. Taptık, K. Kazmanlı, M. Ürgen and A.F Çakır, Sert seramik kaplamalı kesici takım kullanımının ekonomik analizi, Proceedings of the 9^th International Metallurgy and Materials Congress, Vol. I, pp. 383-388, 11-15 June 1997, İstanbul 

F. Sertçelik, A. F. Çakır, M. Ürgen, D. Gabe and D. Ross, Surface Properties of 6063 Aluminum Alloy AC Anodised in Sulfuric Acid solutions, 38 th Corrosion Science Conference, 10-12 September, London, 1997

M. Ürgen and  A.F. Çakır, Corrosion Protection of Metallic Substrates by PVD Produced Hard Ceramic Coatings, 38 th Corrosion Science Conference, 10-12 September, London, 1997

M. Ürgen,  A.F. Çakır, The Corrosion Protective Properties of Nitride Based Hard Coatings Produced by PVD Technique, Proceedings Eurocorr'97, Vol.II, pp. 297-308, 22-25 September , Trondheim, Norway, 1997.

A. Umay, A.F. Çakır and M. Ürgen, The Effect of Zinc and Indium Content on the Performance of Al-Zn-In Sacrificial Cathodic Protection Anodes, Proceedings Eurocorr'97, Vol. I, pp325-330, 22-25 September, Trondheim, Norway, 1997.

F. Sertçelik, A. F. Çakır, M. Ürgen, D. Gabe and D. Ross, Surface Properties of 6063 Aluminum Alloy AC Anodised in Sulfuric Acid solutions, Proceedings Eurocorr'97, Vol. I, pp325-330, 22-25 September, Trondheim, Norway, 1997

E. Şireli, M. Ürgen, A.F. Çakır, 316L paslanmaz çeliklerin üzerinde katodik ark FBB ve oksidasyon teknikleri kullanılarak oluşturulan zirkonyum oksit kaplamaların özellikleri, Proceedings of the 10^th International Metallurgy and Materials Congress, Vol. II, pp. 811-821, 24-28 May 2000, İstanbul 

O.L. Eryılmaz, A. Erdemir, M. Ürgen, A.F. Çakır, Metan ve asetilen plazmasında üretilen elmas benzeri karbon filmelerin aşınma ve sürtünme davranışlerı, Proceedings of the 10^th International Metallurgy and Materials Congress, Vol. II, pp. 869-877, 24-28 May 2000, İstanbul 

M.K. Kazmanlı, M. Ürgen, A.F. Çakır, Molydenum nitrür kaplamaların üretim ve karakterizasyonu, Proceedings of the 10^th International Metallurgy and Materials Congress, Vol. II, pp. 743-75, 24-28 May 2000, İstanbul 

Ulusal Araştırma Makaleleri

M. Ürgen, A.F. Çakır and M. Gerçek, The Corrosivity and Inhibitor Efficiency Experiments of the Water Corrosivity and Inhibitor Efficiency Testing of a Crude Oil Pipeline, Korozyon, 1, 3, 131-42, (1989)

Y. Taptık  M. Ürgen, A.F. Çakır, Korozyon hasarları ve hasarsız muayene yöntemleri ile değerlendirilmesi Methods, Korozyon, 2, 1, 24-31 (1990)

M. Ürgen, A. Umay, A.F.Çakır, Dekorasyon tekniği- Ferritik paslanmaz çeliklere ve Al-Zn ve Al-Zn_In alaşımlarına uygulanması, Korozyon, 4/1, 10-15, 1992.

A. Umay and M. Ürgen, A.F. Çakır, Binalarda kullanılan sıcak ve soğuk su borularında dış korozyon, Korozyon, 5,1, 18-26 (1993)

Ulusal Bildiriler

A.F. Çakır, V. Akgün and M. Ürgen, Korozyonun Türk endüstrisine maliyeti, Scientific and Research Council of Turkey VIII. Metallurgy Symposium, Istanbul (1984)

O. Babacan,  M.Ürgen, A.F. Çakır, 2017 Al-Cu alaşımlarının oyuklanma ve gerilmeli korozyon çatlaması Scientific and Research Council of Turkey VIII. Metallurgy Symposium, Istanbul (1984)

A. Gülen, M. Ürgen, A.F. Çakır, Pitting of AISI 304 paslanmaz çelik boruların formaldehid çözeltisi içerisindeki oyuklanma korozyonu, Scientific and Research Council of Turkey VIII. Metallurgy Symposium, Istanbul (1984)

A.F. Çakır, M. Ürgen,  Denizel ortamda paslanmaz çeliklerin korozyon davranışları, Proceedings of The Turkish Loyd Serial Conferences IV., 398-428, November, Istanbul (1989)

A. Umay, M. Ürgen, A.F. Çakır, Al-Zn-In harcanabilir anotların denenmesinde karşılaşılan problemler Proceedings of the VI. National Metallurgy Congress, pp.528-539 October 31- November 4, Ankara (1990)

C. Coşkun, M. Ürgen, Türkiyenin paslanmaz çelik ithalatına ilişkin bir inceleme, Proceedings of VI. National Metallurgy Congress, pp.745-754, Ankara, Nov. 1990.

F. Sertçelik, M. Ürgen, A.F. Çakır, Molibdat, Sulfat ve kromat iyonlarının paslanmaz çeliklerin oyuklanma korozyonu üzerindeki etkisi, Proceedings of the II. Corrosion Symposium, 33-44, 5-8 November, Ankara (1990)

M. Ürgen, A.F. Çakır, Molibdenin paslanmaz çeliklerin korozyonu üzerindeki etkisi, Proceedings of the II. Corrosion Symposium, 163-172, 5-8 November, Ankara (1990) 

A. Umay, M. Ürgen, A.F. Çakır, Al-Zn-In harcanabilir anotların denenmesinde kullanılabilecek potansiyostatik bir yöntem, Proceedings of the II. Corrosion Symposium, 247-258, 5-8 November, Ankara (1990)

N. Cansever, M. Ürgen, A.F. Çakır The Effect of Molybdate Ions On the Stress Corrosion Cracking of AISI 304 paslanmaz çeliklerin kaynar sodium klorürü çözeltisi içerisindeki gerilmeli korozyon çatlamasına molibdat iyonlarının etkisi, Proceedings of the III. National Fracture Conference, 155-166, Istanbul, September, (1991)

A. Bozbıyık, E.S. Kayalı,  M.Ürgen, "30CrNiMo8" kalite çelik boruda hasar analizi, Proceedings of the III. National Fracture Conference, 243-251, 23-25 September 1991, Istanbul.

Y. Taptık, M. Ürgen, A.F. Çakır, Y. Taptik, M. Ürgen, A.F. Çakır The Evaluation of Life and Dependability Concepts in the Material Selection Applied to the Example of "Corrosion and Corrosion Control with Non-destructive Testing" Proceedings of the IV. National Machine Design and Production Congress, 19-21 September, Ankara (1990)

A.F. Çakır, M. Ürgen, Seminar on Corrosion and Corrosion Protection National Railways, pp 30, 8-9 May, Istanbul (1992)

M. Ürgen, O.L. Eryılmaz, K. Tokmanoğlu, Corrosion of Nitride Based Thin Film Coated Materials Proceedings of the III. Corrosion Symposium, Ed: M. Doruk 33-44, 3-6 November, Ankara (1992)

N.Cansever and M. Ürgen, The Use of Potential Measurement Method to Follow-up the Process Stages During the Stress Corrosion Cracking of Stainless Steel Proceedings of the III. Corrosion Symposium, Ed: M. Doruk, 209-219, 3-6 November, Ankara (1992)

M. Arıkan, H. Çimenoğlu, M. Ürgen, E.S. Kayalı, Failure Analysis on Copper Condenser Tube Proceedings of the III. Corrosion Symposium, Ed: M. Doruk, pp 243-250, Ankara, Nov. 1992.

C. Ay, M. Ürgen, A.F. Çakır, Determination of the Properties of Bituminous Coatings With Alternating Current Impedence Spectroscopy, Proceedings of the III. Corrosion Symposium, Ed: M. Doruk, 289-300, 3-6 November, Ankara (1992)

A. Umay,  M. Ürgen,  A.F. Çakır, External Corrosion of Hot and Cold Water Pipes in Buildings III. Corrosion Symposium, 3-6 November, Ankara (1992)

A.F. Çakır, M. Ürgen, Seminar on Corrosion, Corrosion Protection and Cathodic Protection National Railways, pp 43, 13-14 May, Istanbul (1993)

C. Mitterer, M. Ürgen, A.F. Çakır, O.L. Eryılmaz, Corrosion Properties of Decorative Coatings within the System Zr-B-N, Proceedings of the IV Corrosion Symposium, Ed.: A.F. Çakır and M. Ürgen, pp. 31-38,  25-27 October 1994 Istanbul, Corrosion Association 1994

A.Umay, A.F. Çakır, M. Ürgen, The Effect of Indium and Zinc on the Potential and Efficiency of Al-Zn_In Sacrificial Anodes. Proceedings of the IV Corrosion Symposium, Ed.: A.F. Çakır and M. Ürgen, pp. 151-160,  25-27 October 1994 Istanbul, Corrosion Association 1994

G. Topgül, M. Ürgen, A.F. Çakır, Pittting Corrosion of Al-Ag Alloys, Proceedings of the IV Corrosion Symposium, Ed.: A.F. Çakır and M. Ürgen, pp. 183-190,  5-27 October 1994 Istanbul, Corrosion Association 1994

N. Cansever, A.F. Çakır, M. Ürgen, Stress Corrosion Cracking of 304 Stainless Steel under Salt Crust and the Effect of Mollybdate Ions on Cracking, Proceedings of the IV Corrosion Symposium, Ed.: A.F. Çakır and M. Ürgen, pp. 217-226,  5-27 October 1994 Istanbul, Corrosion Association 1994

Y. Taptık, M. Ürgen, Ö. Keleş, M. Doğansoysal, Ürün Tasarımında Kalite Olgusu ve Malzeme Seçimi ve Ölçme - Kontrol Yöntemlerinin Ürün Kalitesine Etkisi, 8. Uluslararası Metalurji ve Malzeme Kongresi Bildiriler Kitabı, shf. 1391-1403,  6-9 Haziran 1995, İstanbul, Poster.

A. Umay, A.F. Çakır, M. Ürgen, Sacrificial Anodes for Marine Use and the Investigation of the Properties of Al-Zn-In,Proceedins of the Ship Building and Marine Technology Technical Congress 95, pp. 108-118, November 1995, İstanbul

F. Serçelik, A.F. Çakır, M. Ürgen, The Use of Electrochemical Impedance Spectrography for the Evaluation of Organic Paints and Coatings. Proceedings of Paint 95, Paints, Varnish Ink and Supplementary Product Industrial Congress and Exhibition, pp. 89-100, 22-24 October 1995, İstanbul.

M. Ürgen, İnce Film Teknolojisindeki Gelişmeler, Sakarya Üniversitesi- New Mexico Tech. (ABD), İleri Malzemeler ve Teknolojileri Semineri, 3-4 Haziran 1996, Sapanca Oteli, Sapanca/Sakarya.

M. Ürgen, Kazanlarda Korozyon, Korozyondan Korunma Yolları, Hava Kalitesi Kontrolu ve Kazanlarda Korozyon, 5-7 Haziran 1996, TÜBİTAK-SAGEM- Bursa

E. Keleşoğlu, C. Mitterer, M. Ürgen, K. Kazmanlı, Influence of ion bombardment on Structure and Corrosion Protection of TiN and TiB2 Hard PVD Coatings, Proceedings of  5^th Corrosion Symposium, 6-9 Nov. 1996 Adana, 166-174, Corrosion Association Publication, Ankara - Turkey

M. Ürgen, Korozyonun Önlenmesi Açısından Tasarımın Önemi ve Malzeme Seçimi, Korozyon ve Denetlenmesi Semineri, TMMOB Makina Mühendisliği Odasi Bursa Şubesi- Korozyon Derneği, Bursa, 20-22 Şubat 1997

M. Ürgen, A.F. Çakır, Korozyon Hasarları, Hasar Analizi Seminer Notları, pp 6.1-6.14, TMMOB, Metalurji Mühendisleri Odası, Istanbul Şubesi, İstanbul, 7-11 Haziran 1997, 

M. Ürgen, Korozyonun Önlenmesi Açısından Tasarımın Önemi ve Malzeme Seçimi, Korozyon ve Denetimi Semineri,TMMOB Kimya  Mühendisleri Odasi Ege Bölge Şubesi, İzmir, 27-29 Kasım 1997.

F. Sertçelik, A.F. Çakır, M.Ürgen, D.R. Gabe, The effects of Pre-Surface Treatments on the Corrosion resistance of 6063 Aluminum alloy, Proceedings of 7th Corrosion Symposium, 18-20 October, İstanbul, 378-388, Corrosion Association Publication, Ankara - Turkey

Ulusal Kitap

Korozyon Sempozyumu Bildiriler Kitabı, Editörler: A.F. Çakır ve M. Ürgen, 25-27 Ekim 1994 Istanbul, Korozyon Derneği yayını 1994

TEZ YÖNETİMİ

Yüksek Lisans

M. Kürşat Kazmanlı, Effect of structure and composition on the current controlled anodic behavior of Al-Cu Alloys. İ.T.Ü. Institute of Science and Technology, January 1994

Gürhan Topgül, Pitting corrosion of Al-Ag alloys, . İ.T.Ü. Institute of Science and Technology, July, 1994

Ümit Y. Başara, SCC of duplex stainless steels in boiling MgCl₂ solutions. İ.T.Ü. Institute of Science and Technology, July 1994

O.Levent Eryılmaz, Corrosion behavior of multi layer Zr-B, Zr-B-N coated steels, İ.T.Ü. Institute of Science and Technology, February 1996

Yasemin Şen, Stripping of CrN from CrN coated HSS steels, İ.T.Ü. Institute of Science and Technology, February 1998

Yusuf Işık, Production and characterization of MoN coatings, İ.T.Ü. Institute of Science and Technology, Feb. 1998

Azmi Çobanoğlu, Properties of ZrN coatings deposited on AISI 316L implant grade stainless steel by arc-PVD process, İ.T.Ü. Institute of Science and Technology, June 1998

Umut H. Kahraman, The effect of sputtering with neutral molecule source on the surface properties of high speed tool steels, İ.T.Ü. Institute of Science and Technology, June 1998

Erdem Şireli, Properties of ZrO₂ coatings on 316L stainless steels produced by cathodic arc-PVD and oxidation techniques, İ.T.Ü. Institute of Science and Technology, June 1999

A. Murat Yargan, Production and characterization of single-layered and multi-layered CrN and CrN + Cr2N coatings, İ.T.Ü. Institute of Science and Technology, July 1999

Selim Taşcı, Galvanic corrosion behavior of nitride based hard ceramic coatings, İ.T.Ü. Institute of  Science and Technology, September 1999

Yasemin Kılıç, Mo-N Coating of aluminum and aluminum silicon alloys with arc PVD technique, İ.T.Ü. Institute of Science and Technology, January 2000

Ebru Bozyazı, Comparison of wear behaviour of electrolytic hard chrome and CrN Coatings under lubricated reciprocating conditions, İ.T.Ü. Institute of Science and Technology, (Continuing)

Burcu Koloğlu, Effect of coating parameters on boron content and properties of Ti-B-N coatings, İ.T.Ü. Institute of Science and Technology, (Continuing)

Semih Öncel, Production and characterization of AlTiN coatings, İ.T.Ü. Institute of Science and Technology, (Continuing)

Borga Duruk, Perfromance of CrN and TiCN coated drills, İ.T.Ü. Institute of Science and Technology, (Continuing)

Umut Küley, Ders aşamasında

Doktora Tezleri

M. Kürşat Kazmanlı, Effect of bias voltage and nitrogen pressure on the structure and properties of arc-PVD Mo-N coatings, İ.T.Ü. Institute of Science and Technology, September 1999

O.Levent Eryılmaz, Production and characterization of nanocomposite Mo-N-Cu coatings by arc-PVD, (continuing)

Hayati Çağlar, Performance of hard ceramic coated tools, (continuing)

Erdem Şireli, Production of graded Ti-Al-N coatings on carbide inserts with arc PVD technique

Yasemin Kılıç, Ders aşamasında

Ödüller

Fellowship, Max-Planck Institut, Institut für Metallwissenschaften, Stutgart, Germany, 1988-89 

IMF Awards - Jim Kape Memorial Medal, for the paper entitled "The Effect of Molybdate Ions on
AC Sulphuric Acid Anodised 6063 Aluminium Alloys", Institute of Metal Finishing London, UK, 1998

Diğer Akademik Faaliyetler

Verdiği Dersler

Lisans :(1987 -2000) Corrosion, (1987- 2000) Corrosion Protection,(1991-1993) Materials Science, (1992- 1998) Computer programming, (1992- 2000) Material Selection for Corrosion Control, (1992-1998) Case Studies Related to Corrosion Failures, (1997- 1998)  Introduction to Computers and Informatics Systems, (2000- ..) Corrosion and Corrosion Protection, Metallurgy Laboratories II,Surface Treatment,Case Studies Related to Metallurgical Failures                                                                                                                       
Yüksek Lisans: Surface Analysis, Passivity of Metals, Engineering Ceramic Coatings

Yönetime Katkı

1991-1994               Member, Faculty Administrative Board

1992 -1998              Faculty Representative, Library commission

1992                          Member, Faculty Computer commission

1997-                        Member, Faculty Board

1999-                       Member, Department Accreditation Board

2001-                        Member, Faculty Infrastructure Commision

Bilimsel Toplantı Düzenleme

4^th Corrosion Symposium, October-1994- İstanbul, (Member, Organization Committee)

9^th International Metallurgy and Materials Congress June -1997, İstanbul (Member, Administrative board)

5^th Corrosion Symposium, November- 1996, Adana (Member, Advisory board)

6^th. Corrosion Symposium, November –1998, İzmir (Member, Advisory board)

7^th Corrosion Symposium, October –2000, İstanbul (Member, Advisory board)

Araştırma Konuları

Yüzey teknolojileri: Elektrolitik ve dönüşüm kaplamalar,vakum kaplama teknikleri, fiziksel buhar biriktirme, katodik ark FBB, kompozit, nanokrirtalen, çok katlı kaplamalar, yüzey analiz teknikleri Korozyon ve korozyondan korunma: korozyon reaksiyonlarının mekanizmaları, oyuklanma korozyonu, gerilmeli korozyon çatlaması, paslanmaz çelik, aluminyum alaşımları, sert seramik kaplı ve elmas benzeri karbon kaplı yüzeyler.

Araştırma Projeleri

Water Corrosivity and Inhibitor Efficiency Tests for Water Samples to be Used in Hydraulic Testing of 2nd Expansion of Iraq-Turkey Crude Oil Pipeline, (Vice Project Director) I.T.U. Materials and Production Technologies Research and Application Centre

Corrosion Check-up, Yarımca Fertilizers Company (Group Leader) (1987) I.T.U. Materials and Production Technologies Research and Application Centre

Water Corrosivity Tests for Küçük Çekmece Lake Water to be used in Hydrulic Tests in Main Natural Gas Pipeline for İstanbul, (Vice Project Director), (1990) İ.T.Ü Malzeme Bilimleri ve Üretim Teknolojileri Uygulamalı Araştırma Merkezi

Cathodic Protection of the Steel Piles of the Pier, (Vice Project Director) (1990) Petrochemical Industries, Izmir (PETKIM)

Cathodic Protection of Heat Exchangers, (Vice Project Director) (1991) Petrochemical Industries, Izmir (PETKIM))

Cathodic Protection of Pipelines, (Vice Project Director) (1992) Petrochemical Industries, Izmir (PETKIM)

The Effect of Indium on the Electrochemical Properties of Al-Zn Alloy System. (Vice Project Director) (1993), İ.T.Ü. Research Fund.

The Cost of Metallic Corrosion on Turkish Economy, Decreasing-Controlling Methods and Proposals. (Vice Project Director) (1993) Scientific and Research Council of Turkey (TUBITAK)

Production and Characterization of Arc Physical Vapor Deposited Hard Ceramic Coatings, (Project Director), (1994) State Planning Organization of Turkey,

Production - Characterisation and Development of Physical Vapor Depositited (PVD) Coatings
(Vice Project Director) (1994-97 ) NATO, Science for Stability Programme III Project, (NATO-TU-PVD COATINGS)

Copper-Nickel-Chromium Plating Plant Improvement Project. (Co-Project Director) (1997) İ.T.Ü Development Foundation  and PDK  A.Ş.,

Cathodic Protection of Underground Water Pipes (Co-Project Director) (1997) İ.T.Ü. Development Foundation and PETKİM A.Ş.

Characterization of Alumina Based Electrical Ceramics, (Co-Project Director) (1997) İ.T.Ü. Development Foundation and METOP A.Ş.

Characterisation of Hard Ceramic Coated Surfaces, (Co-Project Director) (1997) İ. T.Ü. Development Foundation and M.T.E. A.Ş.

Development and Production of Multifunctional Physical Vapour Deposition (PVD) System and its Industrial Applications, (Vice-Director) (1998) NATO Science for Peace Programme (NATO SfP-972420, NATO SfP-PVD Systems)

430 Kalite Paslanmaz Çeliklerde Yüzey Kalitesi ve Korozyon Özellikleri İ. T.Ü. Development Foundation and Bsh Profilo Elektrikli Gereçler Sanayii A.Ş.

Donatı Korozyonu Analizi” Çakir Apartmani Yönetimi.

Vi-Mineral Isimli Müstahzarin Inorganik Element Içeriğinin Belirlenmesi DEVA HOLDING A.Ş. İlaç Fabrikası

JCB Dişli Kutularinda Döküm Hatalarinin Analizi Döktaş Dökümcülük Tic. A.Ş.

Titanyumun, Kıymetsiz ve Yarı Kıymetli Dişhekimliği Alaşımları ile Elektrokimyasal Etkileşimi Üzerine Araştırmalar, İstanbul Üniversitesi Rektörlüğü Araştırma Fonu

Oksit Kapli Titanyum Anotlarin Karakterizasyonunu, Ergil Makina San. Ve Tic. Ltd Şti.

Agrega numunelerinin karakterizasyonu, NUH Beton A.Ş.

FARKLI MAZOTLARIN YAĞLAMA ÖZELLİKLERİNİN BELİRLENMESİ, FORD OTOMOTİV SAN. A.Ş. (OTOSAN)

ÇİNKO KAPLI İSPANYOLETLERİN PERİODİK TUZLU SU PÜSKÜRTME DENEYİNE TABİ TUTULMASI, PENTEK A.Ş.

HİDROJEN HASARSIZ EMAYE ÇELİKLERİ ,BORÇELİK Çelik Sanayii Ticaret A.Ş.

Sabiha Gökçen Uluslararası Havaalanı Paslanmaz Çelik Yakıt İkmal Hattındaki Korozyonun Değerlendirilmesi ve Öneriler.HES Mühendislik Ltd. Şti

TiCN SERT SERAMİK KAPLAMALARIN ÜRETİMİ, OPTİMİZASYONU VE KARAKTERİZASYONU OPAŞ OTOMOTİV PLATİNLERİ SANAYİ VE TİCARET A:Ş

Aluminyum Döküm Enjeksiyon Kalıplarının Islahı, Kalıp ve Maça Ömürlerininin Yüzey İşlem ve Sert Seramik Kaplama  Yolu  ile Geliştirilmesi (MİTA Kalıp ve Döküm San. A.Ş.

Metro Vagonlarında Korozyon ve Giderilmesi I ve II (İstanbul  Ulaşım A.Ş)