Resume of Research Assistant MURAT BAYDOGAN

PERSONAL

Name and Surname                        :           Murat BAYDOGAN

Birth Place and Birth Date              :           Nigde (Turkey), May 11, 1972

Marital Status                                   :           Married

Address                                            :           Istanbul Technical University

Department of Metallurgy and Materials

Engineering

                                                                       34469 Maslak ISTANBUL

Tel                                                      :           +90 212 285 33 72

Fax                                                     :           +90 212 285 34 27

E-mail                                                :           baydogan@itu.edu.tr

 

EDUCATIONAL

1996/03         Graduate (PhD.):                  Istanbul Technical University

                                                                       Institute of Science and Technology

                                    Dept. of Metallurgy and Materials Eng.

Materials Division

1992/96         Graduate (MSc.):                 Istanbul Technical University

                                                                       Institute of Science and Technology

                                    Dept. of Metallurgy and Materials Eng.

Materials Division

1988/92         Undergraduate (BSc.):        Istanbul Technical University

Sakarya Engineering Faculty

Dept. of Metallurgical Engineering

(second rank among undergraduate students)

EMPLOYMENT HISTORY

1997/present            Res. Assist.               Istanbul Technical University

Dept. of Metallurgy and Materials Eng.

Materials Division

1994/1997                Res. Assist.               Istanbul University Engineering Faculty

Dept. of Metallurgical Engineering

Materials Science Division

RESEARCH AREAS

·        Low cycle fatigue and high cycle fatigue, fatigue crack propagation and fracture toughness of engineering materials

·        Friction and wear in dry sliding and abrasive environments, corrosion wear

·        Intergranular corrosion and stress corrosion cracking,

·        Heat treatment of cast irons, steels and aluminium alloys

·        Mechanical testing of engineering materials

LABORATORY EXPERIENCE

Experienced in preparation of the specimen, performing the tests and analyzing the results in the following laboratories:

a) Mechanical Tests Lab.

Macro and micro hardness, tensile and compression, impact, torsion, creep and stress relaxation, low cycle fatigue and high cycle fatigue, fracture toughness and fatigue crack growth rate tests.

b) Metallography Lab.

Specimen preparation, viewing, quantitative metallographical analysis.

c) Surface Characterization Lab.

Surface Profilometry, Scratch Test, Ultra micro Hardness test.

d) Heat Treatment Lab.

Heat treatment of cast irons and steels, isothermal annealing in salt and oil baths, heat treatment of aluminum alloys (solid solution annealing, quenching, ageing, retrogression and reageing)

AWARDS and HONORS

1988/89         ÝTU Zekiye AKOZ Foundation

1991/92         ÝTU Zekiye AKOZ Foundation

1992                          Second Rank among undergraduate students in the Department of Metallurgical Engineering of Istanbul Technical University.

2000               TUBITAK (The Scientific and Technical Research Council of Turkey) Münir Birsel Foundation

SCIENTIFIC PUBLICATIONS

I - Thesis

PhD. Thesis              Investigation of mechanical and corrosion properties of T6 and

RRA treated 2014 and 7075 quality aluminium alloys

ITU, Institute of Science And Technology, August 2003.

                                   Advisor: Prof. Dr. Huseyin CIMENOGLU

MSc. Thesis              “The effect of austempering on the tensile, fatigue and wear

properties of GGG 60 grade ductile iron”

ITU, Institute of Science and Technology, June 1996.

Advisor: Prof. Dr. Huseyin CIMENOGLU

II - Articles covered by Science Citaion Index (SCI)

1.        Saglam, U., Mindivan, H., Baydogan, M., Cimenoglu, H., Influence of retrogression and reageing on mechanical and corrosion properties of 7039 aluminium alloy”, Zeitschrif fur Metallkunde (accepted for publication).

2.        Baydogan, M., Akoy, M.A., Cimenoglu, H., Kayali, E.S., ”Deformation induced surface roughening of austenitic stainless steels: A case study analysing surface roughening during sheet metal forming process”, ISIJ International (accepted for publication).

3.        Baydogan, M., Cimenoglu, H., “The effect of austempering time on mechanical properties of a ductile iron”, Scandinavian Journal of Metallurgy, 30,6,391-395, 2001.

4.        Pamuk, U., Baydogan, M., Nilufer, I.B., Cimenoglu, H., “An energetic approach to abrasive wear of a martensitic stainless steel”, Scripta Materialia, 42, 881-885, 2000.

5.        Sun, Y., Baydogan, M., Cimenoglu, H., “The effect of deformation before ageing on the wear resistance of an aluminium alloy”, Materials Letters, 38, 221-226, 1999.

III - Proceedings

1.        Akoy, M.A., Baydogan, M., Cimenoglu, H., Kayali, E., “The effect of plastic deformation on the surface quality of austenitic stainless steels”, ESDA’2002, 6th Biennial Conference of Engineering System Design and Analysis, American Society for Mechanical Engineers, July 8-11, 2002, Istanbul, Turkey.

2.        Demirci, C., Ugur, A., Baydogan, M., Cimenoglu, H., “Dry sliding and abrasive wear properties of some zinc – aluminium alloys”, BALKANTRIB’2002, June 12-14, 2002, Kayseri, Turkey.

3.        Baydogan, M., Kigili, E., Uysal, A., Cimenoglu, H., Kayali, E.S., “Investigation of low cycle fatigue properties of reinforced steels produced by the tempcore Process”, 11th. International Metallurgy and Materials Congress, June 5-9, 2002, Istanbul, Turkey, (in Turkish).

4.        Akoy, M.A., Nilufer, I.B., Baydogan, M., Cimenoglu, H., Kayali, E.S., Failure analysis for a product cooling elbow used in petrochemical industry, 11th. International Metallurgy and Materials Congress, June 5-8, 2002, Istanbul, Turkey (in Turkish).

5.        Akoy, M.A., Baydogan, M., Cimenoglu, H., Kayali, E.S., Eruslu, N., Urgen, M., “Failure analysis of a femoral prothesis, 5th. International Conference of Fracture, Proceedings Book, pp. 239-244, Fýrat University, Engineering Faculty, Sep. 6-8, 2001, Elazýg, Turkey (in Turkish).

6.        Mindivan, H. Baydogan, M., Cimenoglu, H., Kayali, E.S., “The effect of dual phase heat treatment on the wear behavior of steels”, 9th. Denizli Material Symposium, Proceedings Book, pp. 164-171, May 2002, Denizli, Turkey (in Turkish).

7.        Mestan, M., Baydogan, M., Cimenoglu, H., “The effect of dual phase heat treatment on the wear behavior of a low carbon steel“, 2nd. Machine Component and Production Technology Symposium, Proceedings Book, pp. 21-26, Nov. 7-9, 2001, Manisa, Turkey (in Turkish).

8.        Dogan, N., Baydogan, M., Tugrul, A. B., Cimenoglu, H., “The effect of radiation on low cycle fatigue behaviour of a stainless steel”, BPU-4, Fourth General Conference of the Balkan Physics Union, Aug. 22-27, 2000, Veliko Turnovo, Bulgaria.

9.        Baydogan, M., Cimenoglu, H., “Fatigue properties of austempered ductile irons”, 10th. International Metallurgy and Materials Congress”, Proceedings Books, Vol: II, pp: 1093-1099, May 24-28, 2000, Istanbul, Turkey (in Turkish).

10.   Ugur, A., Baydogan, M., Cimenoglu, H., “The effect of alloying elements on the wear behaviour of zinc - aluminium based alloys”, 10th. International Metallurgy and Materials Congress, Proceedings Books, Vol: I, pp: 145-152, May 24-28, 2000, Istanbul, Turkey (in Turkish).

11.   Baydogan, M., Kokden, M. U., Cimenoglu, H., “Abrasive wear behaviours of as cast and austempered ductile irons”, EUROMAT’99, The Federation of the European Materials Societies FEMS, Proceeding Books, Ed. P. Neumann, D. Allen, E. Tenckhoff, Vol:7 (Steels and Materials for Power Plants), pp: 219-223, Wiley-Vch, Sept. 27-30, 1999, Munich, Germany.

12.   Baydogan, M., Kokden, M.U., Cimenoglu, H., “Wear behaviour of specially austempered ductile irons”, 1st Science Days, Proceedings Book pp: 80-85, UCEAT Chamber of Mechanical Engineers, Publishing No: 221, Apr. 5-7, 1998 Denizli, Turkey (in Turkish).

13.   Calgýn, M., Baydogan, M., Cimenoglu, H., “Wear behaviour of Cr-Mo-V alloyed tool steels”, 7th. Denizli Materials Symposium, Proceedings Book, pp: 249-256, Apr. 2-4, 1997 Denizli, Turkey (in Turkish).

IV – Seminar

1.        Cimenoglu H., Geckinli E., Baydogan, M., Yildirim S., “Mechanical tests and practical metallography of steels and cast irons”, UCTEA Chamber of Metallurgical Engineering, 2001.

 

RESEARCH PROJECTS PARTICIPATED

 

1.      Participated as a Researcher in the project “The effect of welding on low cycle fatigue behavior of reinforced steels produced by the tempcore process” sponsored by Istanbul Technical University under the supervision of Prof. Dr. Huseyin CÝMENOGLU (2002)

2.      Participated as a Researcher in the project “The effect of alloying elements on the microstructure and wear properties of die cast zamak alloys” sponsored by Istanbul Technical University under the supervision of Prof. Dr. Huseyin CIMENOGLU (2001).

3.      Participated as a Researcher in the project “Low cycle fatigue behavior of reinforced steels produced by the tempcore process” sponsored by Istanbul Technical University under the supervision of Prof. Dr. E. Sabri KAYALI (2000).